Newton Meter Calculator (2024)

Last updated:

Table of contents

What is a newton meter?Newton meter calculatorNewton meter conversionNewton meter and torqueFAQs

Our newton meter calculator is here to help you convert from a newton meter to a list of other torque-measuring units.

You might never have thought of needing a calculator to assist you in converting a newton meter to a foot-pound. But you would have wondered, is a newton meter a joule? Or how much does 1 newton meter equal? You are at the right place, no matter how big or small your question is.

So, let's start by talking about what a is newton meter.

What is a newton meter?

Newton meter is a unit that measures torque and work/energy.

Torque is the turning effect of force. In other words, it is a force that can cause an object to rotate. For instance, you were tightening a nut using a wrench. The motion would be rotational. And we would say the torque was 'x' newton meter (x being any number).

It would be good to remember that 1 newton meter equals the force of 1 newton applied to a moment arm of 1 meter.

We have a work and power calculator that you may wanna check out to get to know more about work and the units that measure it.

Newton meter calculator

The newton meter calculator is one of the simplest tools of its kind. It is effortless to use and has a list of unit options to choose from.

Newton meter is the unit of torque, but so is the foot-pound force, and many others. This means you have a long list of units you can convert from by using the newton meter as your base conversion.

So to use our tool, you must start by entering your amount in the unit of your choice. And then, in the second field, you have the result converted in the unit you chose to convert it to.

For instance, you want to convert 7 N·m to dyn cm. The first field has a default unit of N·m, and you enter 7. In the second field, change the unit to dyne centimeter, and you have your result: 70,000,000 dyn cm.

But the best part is that the tool works in reverse as well. If you want to convert from 5 ton-foot meter to a newton meter, the tool will determine the result of 49,020 N·m.

Newton meter conversion

The newton meter conversion is easy, straightforward, and much-needed. We understand not all calculations use the same units of measurement and require different units in situations. This is why we have created the newton meter calculator to help you convert from newton meter to ft-lbs (foot-pound force), or kN·m (kilonewton meter), and much more.

The list of units we provide to convert from is as follows:

  • Kilonewton meter;
  • Millionewton meter;
  • Micronewton meter;
  • Foot-pound force;
  • Dyne centimeter;
  • Kilogram-force meter;
  • Ton-force meter; and
  • Poundal foot.

Newton meter and torque

Imagine force applied on an object. Now imagine the object rotates due to that force. This is torque. Simple yet so significant.

If you want to know more about it, you may want to check out our torque calculator.

Torque is also measured in joules on occasion as the newton-meter is equivalent to joules, the SI unit of work. Since they are equal to each other, one can be converted into the other. And if that is something of interest to you, it is highly recommended to try out Omni's nm to joules calculator.


Can we measure torque in newton meter?

Yes, we can. Newton meter is the SI unit of torque.

Torque is the force that rotates an object. It involves force, its unit is the newton, and the distance the object is moved, and the unit is the meter. So, combining them both, the newton meter becomes the unit to measure torque.

How much is 2.4 foot-pounds in newton meter?

2.4 foot-pounds (ft·lbs) equals 3.254 newton meters (N·m).

The conversion is straightforward, and all you have to remember is that:

1 ft·lbf = 1.3558 N·m

So, to convert from foot-pound force to newton meters

  1. Note the amount in foot-pounds.
  2. Multiply it by 1.3558.
  3. The result is the quantity in the newton meters.

Is a newton meter a joule?

Yes, a newton meter is equal to a joule. Joule is the SI unit of work and energy.

One joule of work occurs when a force of one newton displaces an object through a distance of one meter.

How can I convert Nm to poundal force?

The conversion from newton meter (N·m) to poundal force (pdl·ft) is simple and requires one small step. But before that, you need to know that 1 N·m = 23.2 poundal force.

So, all you have to do is:

  1. Multiply your amount in newton meters by 23.2; and
  2. You have your result in poundal force.

It couldn't get any easier.

Newton Meter Calculator (2024)


How to calculate Newton meter? ›

Multiply the number of newtons and the distance the object was lifted to get the unit of work, which is called a newton-meter (N-m). 5. One newton-meter is equal to one joule (unit of measure for energy or work).

How much force is 1 Newton meter? ›

One newton meter is equal to approximately 0.738 pound-feet. It's easy to confuse the newton meter with newton times a meter, which is a joule and a unit of energy. The difference is between a force that creates a twist, (rotates an object about some point) and a push through some distance.

What is a Newton meter equivalent to? ›

A newton metre is dimensionally equivalent to a joule.

What is 1 Nm of torque equal to? ›

How is torque measured? Torque is usually measured in Newton metres (Nm) or you might see the imperial measurement of lb-ft (pounds-feet), although this unit of measurement is pretty outdated by now. If you want to calculate the conversion for yourself, 1 Nm is equivalent to 0.738 lb/ft.

What is newton meter for dummies? ›

Just as scales measure weight and tape measures show length, a Newton meter's purpose is to measure force. It is also known to many as a spring scale or spring balance. Specifically, spring scales measure the force acting on an object, the unit of which is the Newton.

How to convert Nm to ft/lbs? ›

One foot-pound (ft/lb) is equal to 1.356 newton-meters (Nm). To convert newton-meters (Nm) to foot-pounds (ft/lbs) all you need to do is divide your figure (Nm) by 1.356.

How much is 20 Nm in torque? ›

How to convert newton-meters to foot-pounds?
20 Nm14.751 ft-lbs
25 Nm18.439 ft-lbs
30 Nm22.127 ft-lbs
35 Nm25.815 ft-lbs
7 more rows
3 days ago

What does 1N of force feel like? ›

It happens that about half a cup full of tea, pushed across a desk, results in a slip force of about one newton. You might also have something suitably heavy in the classroom that pulling it across the floor results in a slip force of 10 newton – you'll need to try this out to find something.

How do you calculate Nm? ›

Calculating nanometers from wavenumber

To convert from wavenumber (cm-1) to nanometers, use the following equation: 1/cm-1 x 107 = nanometers. Or to convert from nanometers to wavenumber, you simply reverse the equation so that wavenumber (cm-1) = 107 / wavelength in nanometers. Or use the tool below.

What is Nm in a car? ›

The physical unit for torque is the newton-meter (Nm). For cars with an internal combustion engine, the aim is to achieve a high torque as early as possible at low engine speeds.

What is the same as a Newton meter? ›

1 Answer. "newton meter" is a unit, product of "newtons" (force) and "meters" (distance). It is a unit of energy, equivalent to "joule".

How much torque is 10 Nm by hand? ›

10 nm is the equivalent of 7. 4 ft/lb. of torque. You could easily exert this force with one crooked finger on the end of a 1 foot lever.

How tight is 5 nm? ›

5Nm is finger tight + one turn of the Allen Key until you feel slight resistance.

How tight is 8 newton-meters? ›

8 NM OF TORQUE = 70.81 lb ft. I would use an inch pound torque wrench with a range of 0 to 100 in. lb. Do you use a torque wrench in the process of repairing your car?

How is a newton calculated? ›

Definition. A newton (N) is the international unit of measure for force. One newton is equal to 1 kilogram meter per second squared. In plain English, 1 newton of force is the force required to accelerate an object with a mass of 1 kilogram 1 meter per second per second.

What is 1 kN equal to? ›

In the context of climbing, kilonewtons (kN) are used to measure forces acting on various elements of the climbing system, such as ropes, anchors, and protection devices. A kilonewton is equal to 1,000 newtons (N), named after the English scientist Sir Isaac Newton.

What is the value of 1 Newton meter? ›

SymbolN⋅m, N m
1 N⋅m in ...... is equal to ...
FPS system0.73756215 lbf.ft
7 more rows

How to measure Nm torque? ›

If you use a force of one Newton at the end of something, like a wrench, and you're one meter away from the turning point, that's 1 Newton meter (Nm) of torque. Torque is calculated by multiplying the force (F) and the distance (r) from the rotation point: τ = F * r.

Top Articles
Latest Posts
Article information

Author: Merrill Bechtelar CPA

Last Updated:

Views: 6016

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.